October 23, 2013

Scott Dittman: Cannabis Cultivation Techniques, Equipment & Efficiency Evolving at Rapid Pace

ScottDittman
By Scott Dittman

The growth and evolution of the medical cannabis industry has been as fascinating as it has been fast-moving, and nowhere is that more true than on the cultivation side of the business.

For those individuals resilient enough to still be around since the industry really began to take shape several years ago, the change is truly remarkable. In the summer of 2010, when the country’s first state-sanctioned cannabis cultivation industry formed in Colorado, the actual crop results were less than impressive. Most cultivators took techniques that had worked for them on a small scale and tried to blow them up to large scale in warehouses all over the state.

The result: They learned some hard – and expensive – lessons very quickly. Growers soon found that just hanging lights from rafters and placing plants on the floor didn’t work well in giant spaces. They lost crops at an astounding rate to everything from pests and powdery mildew to heat and mechanical failures to hermaphrodites and pollen from unseen males that turned entire warehouses to seed.

It wasn’t a pretty scene.

But evolve the industry did. Visit any licensed cultivation center now and you are likely to see a much different picture. Big spaces have turned into much smaller individual grow rooms, which growers quickly learned allow for much more precise (and inexpensive) control of temperature, humidity and CO2. Small rooms also let growers quarantine pest and mildew problems and implement simpler cultivation processes. Today’s growers speak about the volumetric efficiency of their grow space, not just the square footage.

The level of sophistication available for environmental control has also grown dramatically. Advanced programmable logic controllers send today’s growers texts to let them know when the temperature or humidity are outside of acceptable levels, allowing them to make adjustments or hustle back to the garden to investigate. Some growers can even make adjustments from their living room using their smartphones. In short, small problems are not allowed to become big problems any longer.

Growing techniques and equipment are also evolving rapidly as cultivators seek to increase productivity and reduce costs. Experienced cultivators are seeing productivity increases as they experiment with soil-less mediums like hydroponics, aeroponics, deep water culture and nutrient film technique (NFT) systems. Lighting is another area of constant improvement, with high-intensity discharge (HID) lights slowly giving way to well-known lighting options like fluorescent and LED…but also to lesser-known systems like induction and plasma.

Just like cultivation techniques have evolved, the metrics growers use have progressed as well. Remember when productivity was measured in pounds per plant? “Dude, I get two pounds per plant!” was a common refrain a few years back.

Today’s grower most commonly speaks in “pounds per light” to measure productivity. One pound per light (per cycle) has become a baseline metric of the current industry.

Evolution, however, continues to march on and new and more precise metrics are being used by advanced cultivators. Grams per watt (over time) is now being adopted as advanced cultivators seek to compare productivity over various sizes and types of lighting configurations. The end of the evolutionary path, where metrics are concerned, will ultimately be in the form of a total cost per gram produced. After all, as the cultivation of cannabis becomes less art and more agriculture, that is the metric that will really matter.

Not all of the evolution comes from within, of course.

As the industry struggles to become mainstream, entirely new sets of government and building code regulations force further changes. Gone are the days of mylar walls as building codes and regulations require fireproof walls, ceilings and corridors. While double layers of sheetrock make the fire department happy, they unfortunately do nothing for new “food safe” regulations that have sent cultivators scrambling around town for “cleanable” surfaces to put on top of their drywall.

New requirements for CO2 control and exhausting capability will also soon force growers to spend time and money changing or retrofitting their CO2 systems. More changes, some predictable and some not, are sure to be around the corner.

The Greek Philosopher Heraclitus once said “the only thing constant is change.”

He would have been a deft cultivator.

Scott Dittman is the CEO of FusionPharm Inc., a publicly traded company that manufactures turn-key commercial cannabis cultivation systems called PharmPods


2 Comments:

  1. Well written Scott, you capture and relay what we see happening quite well. The backyard/farm growers are evolving as well. Small breeders like me are scrambling to preserve some of the finest genetics. Peace, Jeff

  2. the state should quit screwing around in the MMJ arena. If it is a drug that requires a medical authorization then have it delivered to patients via the hundreds of retail drug stores. Everything is in place for this to happen..

Post Your Comment:


Please note:
Comments are moderated by our editors who do their best to approve comments ASAP. As MMJ Business Daily is focused on business, we approve comments that are specifically relevant to industry professionals. General opinions and questions about cannabis may not be posted.

Wisconsin Legalizes CBD Oils, But Questions Remain

Wisconsin has become the latest state to legalize cannabidiol extracts, joining Utah and Kentucky in [click to read more...]

More Oversight on Rhode Island MMJ Industry Urged

A marijuana working group in Rhode Island is lobbying for greater oversight of the state’s [click to read more...]

Nevada MMJ Businesses Scramble to Meet Application Deadline

Prospective medical marijuana business owners in unincorporated areas of Nevada’s largest county are making a [click to read more...]

Boston Dispensary Told to ‘Go Away’

A medical marijuana dispensary looking to set up shop in Boston can’t seem to win [click to read more...]

CO Seeks to Shut Down Raided Dispensaries

Colorado regulators recently moved to shut down four dispensaries that were targeted during a high-profile [click to read more...]

DOJ Chief ‘Cautiously Optimistic’ About Rec Cannabis Programs

The nation’s top law enforcement official said he is encouraged by Colorado and Washington State’s [click to read more...]

70+ Oregon Cities Temporarily Ban Dispensaries

More than 70 municipalities in Oregon have implemented moratoriums on medical cannabis dispensaries, limiting businesses [click to read more...]

CA Marijuana Cultivators Urged to Cut Water Use

Legal and illegal marijuana cultivators in Northern California could be draining valuable water from the [click to read more...]

Kentucky Approves CBD Extracts Law

Kentucky has joined Utah on the short list of U.S. states to legalize cannabidiol (CBD) [click to read more...]

Maryland Revives Medical Cannabis Program, Passes Decriminalization

Maryland lawmakers have revamped the state’s medical marijuana program by establishing a framework of rules [click to read more...]

Denver Rec Shop Projects $10M-$12M in 2014 Sales

The owner of one of Colorado’s largest recreational marijuana stores projects his 2014 revenues will [click to read more...]

GrowLife Trading Halted by SEC, Cannabis Stocks Drop

The U.S. Securities and Exchange Commission has temporarily halted stock trading for GrowLife Inc. (PHOT), [click to read more...]

Boston Mayor Aims to Block Dispensaries

Boston mayor Martin Walsh will try to block the city’s two planned medical marijuana dispensaries, [click to read more...]

NJ Voters Split on Decriminalization, Oppose Rec

New Jersey voters are split down the middle when it comes to legalizing marijuana possession, [click to read more...]